post

1988 Pulse Autocycle Is An Aircraft-Shaped, Honda Goldwing-Powered Oddity

Is it a plane or is it a car? Well, none actually – it’s the Pulse Autocycle, of which around 360 units were made between 1984 and 1990.

The brainchild of aircraft engineer Jim Bede, the Pulse Autocycle (originally known as the Litestar) was a cross between a motorcycle and a car – hence the ‘autocycle’ in the name. That’s a very simplistic way of describing it, obviously, because one also needs to consider the very unusual design of the vehicle which took heavy inspiration from airplanes, particularly fighter jets.

Actually, the fiberglass shell that protected the two passengers placed in tandem was reminiscent of the Bede BD-5 small aircraft, another of Jim Bede’s creations.

See Also: PAL-V Liberty Pioneer Edition Flying Car Will Set You Back $599,000

One cannot overlook the fact that the Autocycle had wings too, although those were not used for flying but rather to connect the vehicle with the 8-inch side wheels that helped it maintain balance at rest or while turning. Despite technically having four wheels, it was classified as a three-wheeled motorcycle in most states because a maximum of three wheels would touch the ground at any given time. It was also referred to as a Ground Cruising Recreational Vehicle (GCRV).

If you’re excited by the prospect of owning an airplane-like design that is actually a motorcycle with helper wheels and a steering wheel, there is one you can buy right now. Available on eBay with a Buy It Now price of $27,800, this 1988 Pulse Autocycle features a Honda Goldwing 1,200cc four-cylinder boxer engine making 94 horsepower and a fully rebuilt black and red diamond stitched leather interior.

According to the listing, it has 11,071 miles (17,817 km) on the odometer and comes with a fully documented history, two keys, and the factory tow bar. The seller also says the Autocycle has been serviced recently with a new timing belt, as well as new front, rear and outrigger tires.

Standard equipment includes a sliding plexiglass canopy, five-speed manual transmission, air conditioning, front dash blower, AM/FM/cassette radio, power retracting headlamp, and a power windshield wiper.

Accurate specifications of the Pulse Autocycle are quite hard to find, but thanks to the low weight of around 1,000 lbs (453 kg) and the 0.193 drag coefficient, the unusual vehicle is said to do 0-60 mph (0-96 km/h) in under 7 seconds and reach a 130 mph (209 km/h) top speed when equipped with the Honda-built 1,100cc and 1,200cc engines.

more photos…

Photo copyright 2020 Ian Peebles

For GREAT deals on a new or used Subaru check out Sierra Subaru TODAY!

post

GMC Canyon 750 HP SVE Syclone Conversion Will Cost You A New Alfa Romeo Stelvio Quadrifoglio

Presented last week as a throwback to the 1991 performance truck, the modern-day Syclone, built by Specialty Vehicle Engineering (SVE), is one expensive package.

In fact, it is so pricey that you could buy a brand new Alfa Romeo Stelvio Quadrifoglio that starts at $80,500 just for the cost of the upgrade, not counting the GMC Canyon donor truck.

According to the information obtained by MuscleCar&Trucks, you will have to shell out $79,995 for the conversion. On top of that, the truck, which has to be in the extended cab specification, will cost you another $30,000 or so.

Read Also: SVE Syclone Is A 750 HP GMC Canyon Super Truck

Before sending the vehicle over to SVE for the modifications, you will have to pay a $10,000 non-refundable deposit, and subsequently, you will have to decide if you want the optional extras, such as the $1,295 black tonneau cover and $2,495 custom seat trim package.

Nevertheless, when you eventually take delivery of the heavily modified Canyon, you’ll get a truck that boasts 750 HP and 600 lb-ft (813 Nm) of torque thanks to a 5.3-liter supercharged V8 that’s coupled to a heavy-duty eight-speed automatic transmission.

It also features permanent all-wheel drive system, high-performance brakes, heavy duty driveshafts and AWD transfer case, stainless steel exhaust system and lowered suspension, in addition to the custom wheels and new bodywork.

Production is limited to 50 units, and 10 of them have already been spoken for, according to the quoted website, so there are 40 slots up for grabs.

more photos…

For GREAT deals on a new or used Mazda check out Santa Maria Mazda TODAY!